HAVXS4T0900G1100P
Variable speed drive, EXPERT-Standard, 90 kW, 380 V, 3 phase, standard
توضیحات تکمیلی
| Range of product | EXPERT-Standard |
|---|---|
| Product or component type | Variable speed drive |
| Product specific application | Advance general purpose |
| Format of the drive | Standard |
| Product destination | Asynchronous motors |
| IP degree of protection | IP20 |
| Type of cooling | Fan |
| Network number of phases | 3phases |
| [Us] Rated supply voltage | 380V…440 |
| Motor power kW | 90kW for heavy duty |
| Motor power hp | 120.69hp for heavy duty |
| Maximum transient current | (270A during 1 min (heavy duty |
| Asynchronous motor control profile | SVC and V/f energy saving ratio |
| Speed drive output frequency | 550…0 Hz |
| Communication port protocol | Modbus, CANopen, Ethernet/IP, Profibus DP, Profinet, DeviceNet, EtherCAT |
| Device application | Speed control |
| Function available | Automatic voltage regulation (AVR), Energy saving mode, Fixed and variable swing frequency |
| Supply frequency | 60…50 Hz |
| Maximum voltage unbalance factor | 3% |
| Continuous output current | 180A heavy duty |
| Control type | Manual using keypad, Using control terminal, Using serial port, Three way control using output collector terminals |
| Efficiency | 93% |
| Communication service | Read motor parameters automatically |
| Electrical connection | DC bus sharing |
| Speed range | in open-loop mode 1…100 |
| Speed accuracy | speed nominal of %0.1 +/- |
| Regulation loop | Adjustable PID regulator |
| Acceleration and deceleration ramps | Linear adjustable separately from 0.1 s…60 h, S-curve adjustable separately from 0.1 s…60 h |
| Braking to standstill | By DC injection, <30 s |
| Protection type | Overcurrent, Overvoltage, Undervoltage, Overheating, Overload |
| Protection technology | Current limiter |
| Frequency resolution | Digital input: 0.01 Hz, Analog input: 0.55 Hz |
| Display type | 2*7 -segment LED for 27 parameters |
| Device mounting | Wall mounted, Enclosure, Flange |
| Product compatibility | External braking unit, Communication module, I/O extension module |
| Width | 355mm |
| Height | 678mm |
| Depth | 314mm |
| Analogue input number | 3 |
| Analogue input type | AI1 voltage: 0…10 V, impedance: 100000 Ohm, resolution 12 bits |
| Discrete input number | 6 |
| Discrete input type | Programmable (DI1…DI5), Programmable as pulse input (DI6) |
| Analogue output number | 1 |
| Analogue output type | AO1 voltage/current: 0…20 mA or 0…10 V |
| Discrete output number | 4 |
| Discrete output type | configurable relay logic 250 V (5 A) for NO relay output circuit |
| Type of installation | Indoor/outdoor |
| Application | Material handling machine, Textile machine, Material working machine |
| Vibration resistance | 5.9m/s² |
| Relative humidity | 90%…0 without condensation |
| Ambient air temperature for operation | 40…10- °C |
| Ambient air temperature for storage | 60…20- °C |
| Operating altitude | <= 1000m |
| Environmental characteristic | Dust resistant, Corrosive gas free, Oil and vapour resistant |
| Marking | CE |